Home

Before proceeding with the installation of air conditioning it is necessary to remember that one part is inside the house and another outside so choose a place where the appliance well allocated for the air outlet and also consider a significant amount of pipes and wires up to other end of the appliance that should be on the outside. In this way, the closer the two ends are, the cheaper the cost will be with the pipes and the workmanship. Copper and aluminum pipes are also called refrigeration tubing that has gauges and thicknesses appropriate to the thermal load you wish to choose by making the correct BTU’s beads per square meter. The piping with the correct electrical wiring, with cables sized according to the load you choose for the conditioner and also a unique circuit breaker for each air device that is installed. In order to k now more about Air conditioning installation Geelong, you can always take the help of the internet.

How
to Install a Split Air Conditioner Step by Step

First step

Unpack the parts of the
boxes to find out what each part is for, this can allow easier access when
installing the air conditioner , becoming familiar with all units and
components.

Second step

Find a good place where
you can install the Split air conditioner, where you will mount the bracket on
the wall.

Third step

Then take all measures
of the unit that will be inside the house, so mark them on the wall, and
include the measure of the outlet of the pipe and the distance between the
center of the indoor unit and the center of the pipe.

These signs will help,
namely where you should drill the hole in the wall, connecting the two units both
inside and outside.

Fourth step

Once everything is
signaled the correct points is the time to drill the hole on the outside, so
remember to perform the drilling at an angle of thirty five degrees.

Fifth Step

Now you have to adjust
the height by passing all the cables through the hole in the wall to install
the air conditioner, when everything is ready you must fix the internal unit to
the bracket that is previously mounted on the wall.

Sixth Step

As soon as the internal
unit is already attached to the wall bracket, it will be time to cross the
tubes through the open opening to the outside.

Seventh Step

Now to continue to
install the air conditioner you need to unpack the box with the outdoor air
unit and begin to familiarize yourself with this component part of the air
conditioner.

Eighth Step

Now it is necessary
that the outer wall brackets are installed as needed for this unit, it is very
important to ensure that these brackets are properly aligned making the unit
perfectly level.

Make use of the metal
bushings that are provided to mount the outside wall bracket.

Ninth Step

Now the next step is to
carefully unroll the gas pipes by joining the unrolled part with the thermal
tape, which should be included in the assembly.

We often wonder how to
choose a good plumber. Between scams, uncertified convenience stores and poor
workmanship, the opportunity to come across an expert in piping that will not
meet your needs is great. Here are tips that must be
applied to be sure to find the provider that suits you. You may always check
information about Real
Plumbing Corporation
, with the help of the official web sites.

This
plumber has been recommended to you

The recommendation of a
troubleshooter by someone who has already called on the latter is probably a
very good track. Nevertheless, be careful if it is a large company and not an
individual convenience store. Companies can change staff and change their
policies, so it is likely that over time the quality of service will drop.If
one of your devices is down, for example your faucet, find out about its brand
(it is almost always indicated on the device) and call the manufacturer of the latter.
Each brand normally has its authorized service providers who can intervene to
repair the device.

The
plumber meets his commitments

He must be able to give
you an idea of ​​the cost of his telephone intervention for a simple operation
and to commit to a quote after a visit.The announced response time must be
respected. A good convenience store will call you back to inform you of a possible
delay.The plumber does not immediately propose to “change
everything”.At first glance, you have little knowledge of plumbing, and
some stakeholders can benefit from it. A good plumber must take the time to
analyze the problem and look for the best solution, which is not necessarily
the most expensive.

Your
plumber practices reasonable rates

The total amount of the
invoice must include the travel expenses, the cost of labor and materials. A
moving cost and a low hourly rate can mask significant margins on the
equipment.A good plumber knows the cost of his conventional equipment and will
be able to accurately assess the cost of the necessary change of equipment. It
is true that the material can be very expensive. To find out if this is really
what weighs heavily on your potential bill, ask the provider how the price will
change if you opt for another type of equipment.

The
good plumber has the required equipment

He must arrive at home
with the necessary tools, and have all the most common spare parts in his
vehicle.If the repair is complex and requires parts order, it must be able to
install a temporary replacement system. If it is an emergency repair which must
be followed by a more important intervention, take the time to make several
quotes.Whatever the size of the intervention, the plumber must preserve the
aesthetics of the premises, using the appropriate tools and putting in place the
necessary coverings.